LXE Akerstroms Tx700, Configuration Manual

Page: 83 / 146

Trux Configuration Guide WAN
E-EQ-TRUXCONFIG-D-ARC 83
4.3 WAN
Check the contents of the box against the label on the packaging.
Read through these installation instructions before commencing assembly.
!
Connect the supply cable only when everything else has been assembled.
4.3.1 Overview
This document describes the process of inserting a SIM card into the Option GPRS/EDGE/3G PCCard of
your Trux computer.
4.3.2 Requirements
In order to perform this operation you need the following:
•
Torx 20 screwdriver.
•
SIM card with GPRS/EDGE/3G capabilities from your network operator.
4.3.3 SIM card installation
The following procedure describes how to insert a SIM card:
1. Place the Trux upside down onto a flat clean surface.
2. Remove the service hatch by loosening the 2 torx screws.
Figure 61 Open the Trux Computer
3. Remove the antenna pigtail from the GPRS/EDGE/3G PCCard.