LXE Akerstroms Tx700, Configuration Manual, Page: 45 / 146

Trux Configuration Guide Touchscreen
E-EQ-TRUXCONFIG-D-ARC 45
Select the proper Data String Termination setting:
•
If the scanner is configured to end a scanned string with a termination character (for example
a CR or LF) click the button for
Character(s) . Then click the Select.. button and choose the
termination character from the list.
•
If the scanner is not sending a termination character, click the button for Timeout and select
the period in milliseconds.
Click OK to save settings. Click Hide to hide the WLinq information screen.
When WLinq is running, it is indicated by a gray circular icon in the task bar. The icon turns green while
WLinq is processing scanned data or red if there is an error.
To exit the WLinq wedge, click on the taskbar icon then click the Unload button. To restart WLinq,
select Start | All Programs | FreeFloat WLinq | WLinq and click the Hide button.
There are many other options available in WLinq. To learn more, select Start | All Programs |
FreeFloat WLinq | Help for WLinq or review the FreeFloat WLinq documentation included in 6.
FreeFloat WLinq.
3.5 Touchscreen
The Trux computer is equipped with a pressure-sensitive touchscreen. Rather than using a mouse as
pointing device, users select objects by touching the screen with a stylus or a finger.
Always use the accompanying stylus to point, drag or tap the screen. Never use metallic
or sharp-pointed objects.
3.5.1 Using the stylus to select screen objects
To select an object on the interface, gently tap the screen:
•
One time to click.
•
Two times in rapid succession to double-click.
•
Tap on the mouse symbol in the system tray, down in the right corner, the next click will then
be a right click.
3.5.2 Calibrating the touchscreen
Touch-screen accuracy is calibrated using the touch-screen application.
Select Start | All Programs | UPDD | Calibrate .
A series of targets are displayed on screen. Touch the screen at the center of the target. Continue until
the calibration ends. The calibration procedure times out if no user touch is received in 10 seconds.
Configuration options for the touchscreen, as well as online help, can be accessed by selecting Start | All
Programs | UPDD | Settings .