background image

Message Format 

105 

E-SW-LDSPLUSRG-G 

LDS Plus Reference Guide 

Field Identification 

Outbound Fields 

Outbound  

Field 

 
Description 

SOL 

Start of Line (or start of message) character. 

ID1 

The first character of a two-character field that identifies the DOS terminal that 
is to receive this message. 

ID2 

The second character of a two-character field that identifies the DOS terminal 
that is to receive this message. 

TYPE 

A single character that allows the network device to determine if it should 
transmit the message to a DOS terminal or if it is a protocol message requiring 
some different action. 

CTRL 

LXE Control Character. 

N/EF 

Number or Expanded Function character (may or may not be present). 

SEQ # 

Sequence number of message (may or may not be present). 

TEXT 

The actual content of the message. 

EOL 

End of Line (or end of message) characters. 

Inbound Fields 

Inbound  

Field 

 
Description 

SOL 

Start of Line (or start of message) character. 

ID1 

The first character of a two-character field that identifies the DOS terminal 
that is sending this message. 

ID2 

The second character of a two-character field that identifies the DOS terminal 
that is sending this message. 

TYPE 

One or two characters that allow the host computer to determine if this is a 
message from a DOS terminal or a protocol message from the network device. 

CTRL 

LXE Control Character. Allows the host computer to determine whether this is 
a form message and whether it contains a sequence number. 

SEQ # 

Sequence number of message (may or may not be present). 

TEXT 

A group of characters including the message header and any data entered by 
the DOS terminal operator. 

EOL 

End of Line (or end of message) characters. 

 
 
 

Summary of Contents for 1280





































































































































































































































































Reviews: