manualshive.com logo in svg

LXE 1280, Reference Manual

Share
Download
LXE 1280 Reference Manual Download Page 206

188 

General Messages 

LDS Plus Reference Guide 

E-SW-LDSPLUSRG-G 

Too Many TSAPs 

Message ID:

 RFRCTSAPLimit 

It Means:

 

RF transport layer is already at its connection limit, no additonal connections 
can be supported for the time being. 

User Action:

 

Disconnect, then reconnect at a later time. 

RF, SCR

. 

Too Many Users 

Message ID:

 

RFRCUserlimit / RfintfEstabModErr 

It Means:

 

There are more local user’s initialization than the transport layer is allowed to 
support. 

User Action:

 

Disconnect, then attempt reconnection at a later time. 

RF, SCR

. 

Transmitting 

Message ID:

 RFTransmitting 

It Means:

 

The user has requested the contents of the compose buffer to be transmitted to 
the host. Displayed while waiting for an ACK. 

User Action:

 None. 

RF, SCR

. 

Transport Error - Connect Cnf. 

Message ID:

 RFPrimConnectCnf 

It Means:

 

TE received a Connection Confirmation message when it was not expected by 
the terminal. 

User Action:

 None. 

RF, SCR

. 

Transport Error - Connect Ind. 

Message ID:

 RFPrimConnectInd 

It Means:

 

TE received a Connection Indication message when it was not expected by the 
terminal. 

User Action:

 None. 

RF, SCR

. 

Transport Error - Data Cnf. 

Message ID:

 RFPrimDataCnf 

It Means:

 

TE received an In Range Indication message when it was not expected by the 
terminal. 

User Action:

 None. 

RF, SCR

. 

Transport Error - Data Ind. 

Message ID:

 

RFPrimUDataInd / RFPrimDataInd 

It Means:

 

TE received an In Range Indication message when it was not expected by the 
terminal. 

User Action:

 None. 

RF, SCR

. 

Summary of Contents for 1280





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands