LX Traffic Square
Device setup
Document name:
LX_SQUM
Document revision:
R1
5.2
System settings
5.2.1
Aircraft
The following aircraft associated settings can be found in this sub-menu:
•
Category -
which category of aircraft does your aircraft belong to. Changing this will
change the aircraft icon, as depicted with the aircraft icons selection below.
Aircraft icon selection:
•
Airplane
-
•
Glider
-
•
Motor glider
-
•
Rotorcraft
-
•
Gyrocopter
-
•
Airship
-
•
Jet
-
•
Fighter
-
5.2.2
Units
Sets the units used for different parameters throughout the device. The following parameters
and units are available:
•
Altitude -
meters [m] or feet [ft]
•
Climb rate -
meters per second [m/s], knots [kts] or feet per minute [fpm]
•
Speed -
kilometers per hour [km/h], miles per hour [mph] or knots [kts]
•
Wind speed -
kilometers per hour [km/h], miles per hour [mph], knots [kts] or meters per
second [m/s]
•
Distance -
kilometers [km], nautical miles [nm] or statute miles [ml]
•
Pressure -
hectopascal [hPa], inches of mercury [inHg] or millibars [mb]
•
Temperature -
degrees Celsius [C] or degrees Fahrenheit [F]
•
Weight -
kilograms [kg] or pounds [lb]
•
Aera -
square meters [m2] or square feet [ft2]
5.2.3
NMEA
The LX Traffic Square acts as a pass-through device for NMEA data received from the Flarm
through the
DATA IN
port and forwards it through the
DATA OUT
port.
The pilot can set the bauderate of both the incoming and outgoing data by selecting one of the
options between
4800
&
11520
.
Device manual
Public
29
