User Guide
24
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
To allow devices to connect to any Luxul AP in Bridge Mode we recommend setting
a second SSID to allow client devices to connect. In the AP’s management page
select Wireless >> Settings, then select SSID 2 and confi gure the Client network.
NOTE:
This SSID must be different than the SSID used for the bridge
connection, and may match on the Bridge Root and Bridge
Client devices.
5.5 Administration
Administrator Login:
Sets the password for Administrator access to the web
management interface. When connecting to the Access Point through the web
interface, the user is prompted for a User ID (this is always admin) and Password
(the default value is “admin”). It is HIGHLY recommended to change to a secure
password when initially confi guring the Access Point. To change the password,
simply enter the new password, confi rm the password, then click
Save
, and then
Reboot
for the change to take effect.
After confi rming the desired Quick Setup confi guration settings, select
Save
and
then
Reboot
for the settings to take effect.
