a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
19
Basic Wireless Settings:
This screen allows the modifi cation of the following basic
settings for the wireless network:
Wireless Radio:
This fi eld is used to Enable and Disable the wireless network
and is set to Enabled by default. If the Radio is Disabled the Access Point will not
broadcast a wireless signal. To Disable the Wireless Radio, click the dropdown
menu, select
Disabled
, then click
Save
and then
Reboot
for the change to take
effect.
Wireless Mode:
Sets the type of 802.11 wireless network to be broadcast.
Available modes are:
802.11g
802.11gn
The default setting is 802.11gn, and is recommended for optimal performance of
all types of devices in the network. Use the 11g Mode ONLY if there are 802.11b/g
client devices in the network that will not connect in 802.11gn Mode.
Channel Width:
Sets the width of the 802.11n channel. Available widths are:
20MHz (available for both modes)
20/40MHz (only available for 802.11gn mode)
The default (and recommended) setting is 20 MHz to provide maximum perfor-
mance to all client devices and to avoid any potential client issues.
