User Guide
20
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
Channel:
This fi eld allows the user to set which 2.4GHz channel to use. The
default is set to Channel 6 and is the recommended setting due to the Access
Point being optimized to run on Channel 6. However, any other channel (1-11) may
be selected. To change the Channel, click the dropdown menu, select the desired
channel, then click
Save
and then
Reboot
for the change to take effect.
NOTE:
These options are only visible when selecting 20/40MHz
Channel Width)
Primary Channel:
Sets the primary channel of the access point when using the
20/40MHz Channel Width
Secondary Channel:
Sets the secondary channel of the access point when using
the 20/40MHz Channel Width (note: the choices will be limited by the primary
channel selected)
If making any change to the Wireless Settings, select
Save
and then
Reboot
for the
settings to take effect.
5.3.2 Wireless Profi les
Wireless Profi les:
This page allows confi guration of up to 8 Wireless Network
SSID’s:
Operating Mode:
Sets the Operating Mode of the Access Point the available
options are;
Access Point: Allows client devices to connect (default mode)
Client: Allows the AP to connect to an existing network as a client device
