a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
15
a. Be sure the XAP-1030 is properly installed and powered on
b. Open your Web Browser, and enter http://192.168.0.12.
The login window appears as shown below:
c. Enter the user name and password (default user name is ”admin” and default
password is “admin”), and then click “OK” to login to the Quick Setup window.
5.2 Quick Setup
Quick Setup:
For most installations, it is expected that the Quick Setup page will
be suffi cient to optimally confi gure and deploy the XAP-1030 Wi-Fi network. The
Quick Setup page consists of the following:
DHCP Client:
Enabled or Disabled. DHCP (Dynamic Host Confi guration Protocol)
is used to automatically assign an IP Addresses to a device on the network. If
DHCP is enabled on the Access Point, it will no longer use the static address set
by Luxul at time of manufacturing and will request a dynamic IP Address from the
Router (sometimes referred to as the Gateway).
