a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
21
Bridge Root: Sets the AP into Bridge Root mode allowing Bridge Clients to
connect (regular client devices cannot connect to this mode)
Bridge Client: Sets the AP into Bridge Client mode allowing it to connect to a
Bridge Root (regular client devices cannot connect to this mode)
Network Name (SSID):
Sets the name of the Wireless Network. If the SSID is not
set on a profi le, the name of the network will not be broadcast.
NOTE:
Profi le 1 is set during Quick Setup
SSID Broadcast:
This gives you the option to hid the Network Name only allow-
ing devices that already have the profi le saved to see and connect to the AP.
Security Mode:
Sets the wireless security encryption mode.
Encryption:
This fi eld only shows while in WPA mode. It is used to select the
encryption method WPA will use (default is TKIP & AES).
WEP Key:
This fi eld only shows while in WEP mode. Allows the input of a 128 bit
WEP key.
WPA Passphrase:
Sets the passphrase for wireless network access.
NOTE:
If no Network Name (SSID) is specifi ed, the profi le is not active.
5.4 Bridge Setup
5.4.1 Client Mode
Client:
Connects to an existing wireless network as a client device
