![background image](http://html1.mh-extra.com/html/luxor/mb-36/mb-36_installation-and-owners-manual_1952567003.webp)
WARNING
-DO NOT burn ANY materials in this fireplace.
-All occupants of the home, especially children, should be alerted about the hazards of the high surface
temperature and the chance of severe burning or the possible ignition of clothing.
-Young children should be carefully supervised when they are in the same room as the appliance.
-Due to the high temperatures, the fireplace should be installed away from furniture and draperies and out of
traffic area.
-Nothing should ever be placed on or near the surface of the fireplace, including the top of the unit.
-Clothing or other flammable material should not be placed on or near the appliance.
-Make certain the control panel, burners, fans, and venting system are kept clean. Inspection of these systems
should be inspected annually by a qualified service technician.
-Any safety screen or guard removed for servicing the appliance must be replaced prior to operating the
appliance.
-The fireplace, under NO circumstances, should ever be modified.
-Do not operate the fireplace if damaged, or if the glass is cracked. Any repairs must be done by a certified
technician.
General Safety (Home Owner)
Fire Extinguisher: Every home should have at least one fire
extinguisher. An approved Class A-B-C extinguisher
should be mounted on the wall near an exit and close to
the application, but not so close that accessibility to the
extinguisher could be blocked by a fire. Your local Fire
Department can advise you concerning the most
appropriate location.
Smoke Detectors & Carbon Monoxide Detectors on each
floor of your home to ensure your safety. It should be
located away from the gas appliance and close to the
sleeping areas. Follow the detectors manufacturers
placement installation and maintenance instructions
Safety for the installer
-Wear gloves and safety glasses for protection.
-Exercise extreme caution when using ladders or
when on roof tops.
-Be aware of electrical wiring locations in walls
and ceilings.
-Use a back support for heavy lifting.
Vent safety
-Venting must be installed according to local
codes.
Electrical code
When installed, these appliances must be
electrically grounded in accordance with local
codes.
Page 2
Table of Contents:
Page 1: Pre-Start Up
Page 2: General Safety
Page 3: Specifications
Page 4: Framing & Clearances Louvered
Page 5: Framing & Clearances Clean Face
Page 6: Framing & Clearances for Santa Fe
Page 7: Venting
Page 8: Venting Continued
Page 9: Venting Continued
Page 10: Door Fitting
Page 11: Electrical
Page 12: Planning
Page 13: Fan Installation Kit
Page 14: Thermostat Installation
Page 15: Log Installation
Page 16: Log Installation Continued
Page 17: Parts List
Page 18: Lighting Instructions
Page 19: Final Checks
Page 20: Trouble Shooting
Page 21: Trouble Shooting Continued
Page 22: Maintenance