Lip goes at the
top as shown.
4 self tapping screws
in pre-drilled holes.
Please note: standoffs
must be removed for
installation of clean
face kit. The CFK
then becomes the
standoffs.
Installation of Clean Face Kit continued
Flat piece sets in
place on tabs.
Lip goes at the
top as shown.
Bring finishing product
right down to the lip as
shown.
Overlap side so it is flush
with the opening as shown.
Please note: the custom doors we manufacture
for this unit fit inside the opening, so do not
bring finishing products beyond the opening.
Simply overlap all the metal as shown below to
ensure a nice square finish.
Page 7
