Lunos Gesture Control 5/GS, Installation Manual

Page: 21 / 32

21
Commissioning EN
1 Connect all devices according to the selected circuit diagram
2 Remove the touch field from the base plate
3 Check the setting of the DIP switches
4 Switch on the power supply to the gesture control and the devices connected to
it
5 Plug the touch field onto the base plate
If the connection is successful, the LEDs on the left and right side of the gesture control
will light up as follows during the startup process:

Left side blue for digital connection to T1 and R1

Right side green for digital connection to T2 and R2

Left side yellow for analogue connection to T2

Right side yellow for analogue connection to R2