Lunos Gesture Control 5/GS, Installation Manual

Page: 27 / 32

27
In the motor control display, the ventilation stage of the connected ventilation system can
be changed for the selected channel. The executed stage is indicated by the circumferenti-
al LEDs. Each side stands for two stages, i.e. half a side for one stage, starting at the
bottom left side, over the top and right side, up to the bottom left side. If automatic humidi-
ty control is activated, manual changes to the ventilation stage are valid for one hour.
Rough setting
Vertical gestures can be used to make a rough setting of the stage. An upward wiping
movement increases the executed stage, a downward movement decreases the executed
stage. This switches between the stages 0, 1, 4 and 8.
Fine setting
The upper and lower operating points can be used to fine-tune the stage. An operation at
the top increases the executed stage by one, an operation at the bottom reduces the
stage by one.
The minimum and maximum stages can be activated directly via the left (minimum) and
right (maximum) operating points.
Change of the airflow volume