Lunos Gesture Control 5/GS, Installation Manual

Page: 24 / 32

24
Standby displays
After startup, the gesture control changes to the standby display. In the standard version,
the display of temperature and humidity appears first.
You can switch between the standby displays by horizontal gestures or by touching the left
or right control point in the order shown below. The scrolling of the displays takes place in
a rolling manner, i.e. after the sleep mode the ambient light returns and vice versa.
Sleep mode
When the sleep mode is displayed, all the LEDs light up circumferentially at the lowest
brightness level. The brightness can not be adjusted here.
Rainbow
A flowing rainbow, a colour play of the RGB LEDs is displayed circumferentially.