Lunos Gesture Control 5/GS, Installation Manual

Page: 29 / 32

29
The individual parameters of the comfort functions can be adapted to your own require-
ments. To do this, hold down the operating point of the corresponding comfort function for
2-5 s. During operation, the control pulses every second.
Automatic humidity control
The humidity limit values are displayed on the upper side and can be set via the operating
points on the left (lower switching threshold) and right (reaching the maximum level).
On the left side, vertical gestures or the operating points at the top and bottom can be
used to set the minimum level when humidity control is activated.
Night-time reduction and intensive ventilation
The runtime shown on the upper side is roughly set by horizontal gestures and finely
adjusted via the operating points on the left and right. One LED stands for about half an
hour. The maximum runtime is eight hours.
The stage performed is shown on the left side (not for summer ventilation). It can be
adjusted using vertical gestures or the operating points at the top and bottom. LED at the
bottom means low stage, LED at the top means high stage.
Summer ventilation
The runtime shown on the upper side is roughly set by horizontal gestures and finely
adjusted via the operating points on the left and right. One LED stands for about half an
hour. The maximum runtime is eight hours.
Modified settings are accepted when the middle operating point is activated for 2-5 s.