Lundix It SPC Bridge KNX, User Manual

Page: 22 / 25

© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION
AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION OF LUNDIX IT.
SPC Bridge KNX User Manual
Revision 1.0
Page 22 of 25
Reference 2020-111
7 Appendices
7.1 SPC Command Error Codes
Error Code
Error Message
0 OK: Command succeeded
10 ERROR: Generic
11 ERROR: Unknown
12 ERROR: Missing ID
13 ERROR: Invalid ID
14 ERROR: Unknown Tag
15 ERROR: Memory Full
16 ERROR: Invalid Data
17 ERROR: Missing Data
18 ERROR: Invalid CRC
19 ERROR: Invalid Length
20 ERROR: Not ready
21 ERROR: Invalid Sequence No
22 ERROR: Invalid Decryption
23 ERROR: Invalid Connection Details
24 ERROR: Invalid Username
25 ERROR: Invalid Password
40 ERROR: Generic check failed
50 ERROR: Active
51 ERROR: Inactive
52 ERROR: Invalid User
53 ERROR: Invalid Number
54 ERROR: Authentication Failed
55 ERROR: Engineer Not Authorizedl
56 ERROR: Invalid Name
57 ERROR: Invalid Profile
58 ERROR: Invalid Site Code
59 ERROR: Invalid PIN
60 ERROR: Duplicate
61 ERROR: Invalid Card Number
62 ERROR: In use
63 ERROR: Global ID in use
64 ERROR: Global Data Protected
65 ERROR: No Rights
66 ERROR: System Set
67 ERROR: Cannot delete
68 ERROR: Cannot delete last
69 ERROR: Date
70 ERROR: Calendar
71 ERROR: Area
72 ERROR: Door
73 ERROR: Web password not enabled