© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION
AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION OF LUNDIX IT.
SPC Bridge KNX User Manual
Revision
1.0
Page
11 of 25
Reference
2020-111
5.
Select
Add ATP to FlexC RCT
and change following from the default settings:
- SPT Account Code = 999
- RCT URL or IP Address = IP Address of the SPC Bridge
- ATP Category = Cat 6 [Ethernet]
6.
Open
Advanced ATP Settings
and change following from the default settings:
- Encryption Key Mode = Fixed Encryption
- Encryption key (64 hex digits) = Your own key. Must be exactly 64 hex digits (0-9, a-f).
7.
Leave Full Engineer mode.
4.2.2
SPC Bridge - SPC Communication Settings
In the
SPC Bridge Web interface,
login and select
SPC ->SPC Communication
and fill in the form
according to:
Element
Description
ATP Encryption Key
ATP Encryption Key. 64 hex numbers (0-9, a-f, A-F). Must match corresponding key in SPC
Panel FlexC settings. (Default key: 000011112222…ddddeeeeffff)
NOTE!
Of security reason a saved encryption key is never shown again. Just leave the field
blank if you don’t want to change the key.
NOTE!
In Full Engineer mode the SPC panel is not reporting any events to the SPC Bridge.
