© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION
AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION OF LUNDIX IT.
SPC Bridge KNX User Manual
Revision
1.0
Page
16 of 25
Reference
2020-111
5
ETS KNX Configuration
5.1
First Time Configuration
To configure the KNX interface you should use the KNX standard configuration tool ETS. The
configuration is based on a generic product database from Weinzierl, but adapted according to the
Communication Objects below. For a quick start please copy and paste the configuration from one of
the attached ETS project templates:
1.
On
ETS project
page, import the template project file that best match your size of SPC
system.
2.
Open the template project. In the
Topology
tree, select and copy the item
1.1.1 SPC KNX
SPC Bridge
.
3.
Switch to your ordinary project and paste the copied item to the Topology tree (see
example below).
4.
Change the individual address to desired address of the KNX interface.
5.
Download (full) configuration to the KNX interface.
NOTE!
To set the KNX interface in
programming mode
you need to use SPC Bridge Web GUI, see section
KNX Interface Info
(Programming Mode)
.
After successful first time configuration you can link the communication objects (datapoints) to
group addresses as usual.
5.2
Communication Objects
5.2.1
KNX Datapoint Map
States, status and commands from /to the SPC system are mapped to predefined datapoints/group
objects on the KNX interface. The datapoint map has following main structure:
