2.7 Installing Mini GBIC (SFP) transceivers
The GigaCore 26i and GigaCore 26i with PoE come with six SFP cages
at the rear of the unit. These cages accept mini GBIC transceivers.
1
Insert the transceiver into the SFP cage.
Once properly engaged, the transceiver can’t be removed.
3
Open the bail wire to disengage and remove
the mini-GBIC transceiver.
Be aware of the insertion direction:
port 13 & 15 should read 21, 23 and 25
port 14 & 16 should read 22, 24 and 26
Bail wire delatch
Bail wire delatch
Bail wire
delatch
Bail wire
delatch
Dust cap
Device shown with dust cap
and bail wire delatch.
For any other model of mini-GBIC transceiver, please refer to the
transceiver manual.
Recommended transceivers
In order to get the best performance, Luminex recommends the use
of the following transceivers:
LU 90 00871
GigaCore 1.25Gd Multi-Mode Fibre transceiver
LU 90 00872
GigaCore 1.25Gd Single-Mode Fibre transceiver
LU 90 00874
GigaCore 1.25Gd copper RJ45 transceiver
1
3
2
9
2 | INSTALLATION /
2.7 INSTALLING MINI GBIC SFP TRANSCEIVER
