Luminex GigaCore 26i with PoE, User Manual, Page: 27 / 30

6. TECHNICAL SUPPORT
5.3 Factory Reset
Condition 1: The device is switched OFF
Hold the mode button while connecting the device to mains power.
After a few seconds the four status LEDs will start blinking red. Releas-
ing the mode button while the LEDs are blinking red will factory reset
the device.
Be aware that releasing the mode button before the status LEDs are
blinking red will cancel the operation.
Be aware that releasing the mode button after the status LEDs stopped
blinking red will cancel the operation.
Sometimes it is required to get more help with your device or applica-
tion. There is a knowledge base available online that gets updated on
a regular basis at: https://support.luminex.be
If you need to ask our team for more help or you need to return a de-
vice to Luminex for diagnostics or repair, you can also fi nd the option
on this page to request an RMA or start a support ticket.
18s
Hold the reset button
while powering the unit
Release the button = Factory Reset Release the button = Cancel Function
5s 5s
RED BLINK
Timing
27
5 | RESET / 5.1 RESET / 5.2 RELOAD DEFAULT / 5.3 FACTORY RESET