LUMENIS Novus Spectra, Operator'S Manual

Page: 46 / 110

Novus Spectra
0642-543-01, Rev A, 12/02
46 Maintenance
F203 The footswitch has been depressed while
trying to enter ready mode. Release the footswitch. Press the
ready button to continue, ensuring
that the footswitch is not depressed.
F204 Footswitch error First check footswitch connections
and cord. If the condition persists,
contact your local Lumenis
representative.
F402 Delivery device error First, remove and inspect the delivery
device as instructed in your delivery
device operator manual; then, verify
that the device is properly connected
as instructed. If the condition
persists, contact your local Lumenis
representative.
E501 The laser detected a lower level of energy
than the level selected by the user. Turn off the system for five seconds,
then restart. If the condition persists,
contact your local Lumenis
representative.
E502 The laser detected a higher level of
energy than the level selected by the user. Turn off the system for five seconds,
then restart. If the condition persists,
contact your local Lumenis
representative.
E701 The laser detected an over temperature
condition. Turn off the system for 1 minute,
then restart. If the condition persists,
contact your local Lumenis
representative.
F803 Power interlock error Turn the laser on and off. If the
condition persists, contact your local
Lumenis representative.
F503-F505, F601-F604,
F702-F704, F901-F909,
CA01 Internal system operating errors Contact your local Lumenis
representative.
Problem or Error
Code
Probable Cause Suggestion