Novus Spectra
0642-543-01, Rev A, 12/02
38 General Operation
Intraoperative Instructions
WARNING -
Incorrect treatment settings can cause serious tissue damage.
Therefore, it is recommended that you use the lowest acceptable treatment
settings until you are familiar with the instrument’s capabilities. Use extreme
caution until you thoroughly understand the biological interaction between the
laser energy and tissue.
1
Set the treatment values, as instructed in this manual, and verify that the
desired settings are displayed on the control panel.
2
Ensure that the aiming beam is visible and position it on the target tissue.
3
Place the laser in ready mode
4
Depress the footswitch to deliver the treatment beam to the tissue.
The
(laser emission) icon will illuminate on the remote control, and the
system emits a beep.
If surgery must be interrupted, place the laser in standby mode to disable the
footswitch.
Summary of Contents for Novus Spectra
