background image

Avertissement

: NE PAS regarde directement la sortie de la source lumineuse. L’intensité lumineuse 

de cette source est supérieure à celle de la majorité des appareils d’éclairage disponibles dans le 
commerce et est conçue pour un raccordement direct à un microscope ou autre appareil de bio-
analyse.

Warning

: DO NOT turn on the light without

 

the output safely

 

directed

 

into an enclosed optical path. 

 

DO NOT point the light output directly onto any flammable or burn-susceptible material.

 

 This in-

cludes all animal or vegetable tissues, plastics, fabrics, paper and liquids.

Avertissement

: NE PAS allumer la lumière sans que la sortie ne soit dirigée de manière sûre dans un 

chemin optique inclus. NE PAS pointer la sortie de lumière directement sur tout matériau inflamma-
ble ou susceptible de brûler. Cela comprend tous les tissus, les plastiques, les tissus, le papier et les 
liquides animaux ou végétaux

RISK GROUP 3 

Warning

: Possibly hazardous optical radiation emitted from this product. Do not look at operating 

lamp. Eye injury may result. 

Warning

: Infrared (IR) emitted from this product. Do not look at operating lamp.

Warning

: UV emitted from this product. Avoid eye and skin exposure to unshielded product.

GROUPE DE RISQUE 3 

Avertissement

: Infrarouge (IR) émise par ce produit. Ne regardez pas la lampe d'exploitation.

Avertissement

:  Rayonnement optique Peut-être dangereux émis par ce produit . Ne regardez pas 

la lampe d'exploitation. Une blessure oculaire peut entraîner.

Avertissement

: UV émis par ce produit . Évitez les yeux et la peau exposition au produit non blindé.

Caution

: DO NOT open the unit. There are no serviceable parts inside and opening the light engine 

enclosure will void the manufacturer’s warranty.

Attention

: NE PAS ouvrir l’appareil. Il ne contient aucune pièce réparable et l’ouverture de son boîti-

er a pour e

et d’annuler la garantie.

PEKA Light Engine Manual 57-10004

 

        

 

 

          

6

Summary of Contents for 90-10054













Reviews: