![background image](http://html1.mh-extra.com/html/lumencor/90-10054/90-10054_manual_1948039008.webp)
3. Operating Instructions
3.1 Contents
The PEKA light engine ships with the following list of standard com-
ponents:
1.
PEKA light engine configured with an output adapter for cou-
pling to a specific microscope transillumination port.
2.
A 9 V / 4.45 A DC power supply (Lumencor part no.
27-10017).
3.
A region-specific AC power cord for the power supply (see
adjacent table).
The unique 4- or 5- digit serial number of the light engine is marked
on a label a
ffi
xed to the back panel
(see Figure 3).
3.2 Installation
NOTE: Any end-product/system incorporating or coupled to a Lumencor Light Engine shall be fully
evaluated to verify all applicable safety and regulatory compliance requirements prior to use.
When setting up the PEKA light engine, be sure that the adapter (Figure 1) is securely attached to the
appropriate port of the microscope. Usually this will be the transmitted light illumination port. Be
careful to properly support the PEKA light engine until it is mechanically coupled to the instrument.
PEKA Light Engine Manual 57-10004
8
Set screw
fastener
Figure 1.
PEKA light engine with output
adapter for coupling to Nikon Ti/Ni/Ci micro-
scope transmitted light port.
Locating
pin
AC Power Cords
Region
Part Number
North America
29-10002
Europe
29-10005
United Kingdom
29-10004
Israel
29-10008
Australia/New Zealand
29-10024