Regulatory Models
Lumencor utilizes regulatory model names for all certified and CE marked products. The regulatory
model names are traceable to all regulatory documentation, third party reports and certifications.
“
Regulatory Model: Peka
” is used as a representative model for all certified and CE marked Peka Prod-
ucts.
Emissions
This equipment has been tested and found to comply with the limits of EMC directive 2014/30/EU and
FCC part 15 (CISPR 11:+A1:2016). These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Safety Certifications
TÜV SÜD America, CB Certification (IEC 61010-1:2010)
TÜV SÜD America, NRTLus Certification (UL 61010-1:2012/R:2016-04)
TÜV SÜD America, cNRTL Certification (CAN/CSA-C22.2 No. 61010-1:2012/U2:2016-04)
TÜV SÜD America, EN Certification (EN 61010-1:2010)
CE Marking
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU+2015/863/EU)
REACH Regulation (EC) No. (1907/2006/EC)
EU Declarations of Conformity can be found at
https://lumencor.com/company/compliance
For EU customers discarding end-of-life Lumencor electrical and electronic equipment: Please submit an
RMA request with “Recycle product under WEEE” in the Description of Issues field.
For disposal in countries outside of the European Union: This symbol is only valid in the European Union
(EU). If you wish to discard this product, please contact your local authorities or dealer and ask for the
correct method of disposal.
Lumencor, Inc.
|
14940 NW Greenbrier Parkway | Beaverton, OR 97006 USA | 503.213.4269 |
Revision C
011822
PEKA Light Engine Manual 57-10004
2
Lumencor Light Engines as supplied, and as represented in this manual, meet safety and regulatory require-
ments
For Research Use Only.
If the light engine is incorporated into an instrument or system for a specific end-
use application, it is the responsibility of the system integrator to verify that the light engine, and the system into
which it is incorporated, meet all safety and regulatory requirements of that end-use application.