background image

 

‐ 16 ‐ 

 

12. Keep hands clear from the wedge and crush hazard areas. 

 

CRUSH WARNING 

The wedge can cut through skin, break bones and cause serious bodily injury. Keep both hands 
away from the wedge and beam slide. 
Serious accidents can happen when other people are allowed inside the work zone. Keep 
everyone besides the operator out of the work zone while operating the control lever. 
DO NOT wear loose clothing that can get tangled in the moving parts of the log splitter. 
Only use the log splitter in daylight/with adequate lighting so you can see and safely operate the 
log splitter. 
 

 

13. Push the control lever FORWARD with one hand to split the log. 

 

14. Pull the control lever BACKWARD with one hand to return the wedge to its’ original position. 

 

CAUTION 

If a log gets stuck or will not split completely, push the control lever in the reverse direction and 
allow the splitter to strip the log from the wedge. 
 
If a log remains stuck after trying the method above, turn the log splitter completely off and 
carefully use a sledge hammer and crow bar to remove the log. 
 
ALWAYS keep hands clear of the log and wedge when the log splitter is retracting. 

 

 

15. Always keep the work zone clean and free of split wood and debris. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for YTL-590-111


























Reviews: