‐ 15 ‐
6. The log splitter must have at least seven feet of clearance from combustible material. For safe
operation the log splitter must be on a dry and level surface with stable footing. Do not use the log
splitter on mud, ice, brush or snow. Always maintain a clear, dry work zone when using the log splitter
as failure to do so at all times may result in serious bodily injury or death.
NOTE: Serious accidents can happen when other people are allowed inside the work zone. Only the
operator should be inside the work zone while operating the control lever.
7. Always wear proper safety gear, including eye protection, gloves and work boots when operating
the log splitter
8. Start the engine and make sure the log splitter is on level ground before operating.
NOTE: The hydraulic oil needs to be above 10°F (-12C°) before starting the engine. Cold hydraulic
oil can damage the hydraulic pump. If the outdoor air temperature is below 32°F (0C°), before
splitting wood allow the log splitter to warm up by extending and returning the wedge several times.
9. To prevent the log splitter from moving during operation, put the support leg in the down position
and block both tires.
10. Set the log splitter in the horizontal position.
NOTE: HORIZONTAL position is used for lighter logs that can easily be loaded onto the beam.
Back injury can result from lifting logs onto the log splitter if proper lifting techniques are not used.
11. Load a log onto the beam and up against the endplate (Max Log Length-20”)
Summary of Contents for YTL-590-111
Page 6: ...6 PACKAGE CONTENTS...
Page 22: ...22 DRAWING AND PARTS LIST...
