Lumberjack YTL-590-111, Instruction Manual

Page: 10 / 25

‐ 10 ‐
STEP 7: Add Engine Oil
7.1 Make sure the log splitter is on a flat, level surface.
7.2 Remove the oil fill cap/dipstick before adding the engine oil.
7.3 Refer to the separate owner’s engine manual to determine the amount of SAE10W-30 engine oil
needed; add the correct amount of engine oil and replace the oil fill cap/dipstick.
7.4 Check the engine oil level daily and add more engine oil to maintain proper levels as needed.
NOTE: During the break-in period, engine may use oil quickly so check the engine oil level often.
CAUTION
DO NOT attempt to crank or start the engine before properly filling with the recommended type
and amount of engine oil. Failure to follow instructions regarding engine oil may damage or
destroy the log splitter and will void the log splitter’s warranty.