Lumberjack YTL-590-111, Instruction Manual

Page: 7 / 25

‐ 7 ‐
TOOLS REQUIRED

Screw Driver

Hammer

Band Cutter

13mm, 17mm and 24mm Wrenches

Large Adjustable Wrench
STEP 1: Attach the Wheel Stand Assembly to the Beam Assembly
1.1 Remove the valve handle fix pin from the valve, then reinstall the pin with the handle in a vertical
position.
1.2 Attach the wheel stand assembly (#21) to the beam assembly using the hex bolts M10x65 (#46), large
flat washers Ø10 (#47), flat washers Ø10 (#26) and the lock nut M10 (#29).
STEP 2: Attach the Wheels
2.1 First remove the O lock ring (#45) and the flat washer Ø16 (#20), then attach the wheel (#1) to the
wheel stand (#21) using the flat washer Ø16 (#20) and the O lock ring (#45). Repeat the same
process on other side to attach the second wheel.
Note: The protruding part is on the inside of the wheel.
ASSEMBLY INSTRUCTIONS