IS 12-TSP / IGA 12-TSP Manual
Data format UPP (Universal Pyrometer Protocol)
•
32
Description
Command
Parameters
Setting of
temperature sub
range:
AAm1XXXXY
YYY
XXXX (hex 4-digit) beginning of temp. range (°C)
YYYY (hex 4-digit) end of temp. range (°C)
Analog output:
AAasX *
)
X = 0 or 1 0 = 0...20 mA 1 = 4...20 mA
Limit contact 1:
AAs1XXXX
XXXX = switch point limit contact 1
(ASCII-hex, 4 digit, full degree in °C or °F)
Limit contact 2:
AAs2XXXX
XXXX = switch point limit contact 2
(ASCII-hex, 4 digit, full degree in °C or °F)
Setting hysteresis limit
contacts:
AAhlXX
XX = 2 … 20, full degree in °C or °F
Changing °C / °F:
AAfhX *
)
Output: X = 0: display in °C; X = 1: display in °F
interface type:
AAin
Output: X = 1 or 2; 1 = RS232, 2 = RS485
Address:
AAgaXX *
)
XX = (00 ... 97)
00 ... 97 = regular device addresses
99 = global address with response
98 = global address without response (only setting
commands!)
Baud rate:
AAbrX *
)
X = 1...6 or 8 (decimal)
1 = 2400 Baud
4 = 19200 Baud
(7 is not allowed)
2 = 4800 Baud
5 = 38400 Baud
8 = 115200 Baud
3 = 9600 Baud
6 = 57600 Baud
Wait time:
AAtwXX *
)
XX = 00 ... 99 (decimal)
Error status:
AAfs
Output: XX; XX=00…FF (00 = no error)
(01…FF: error code for LumaSense service)
Lock keyboard:
AAlkX
X = 0 ... 3
1 = lock lk1, removal with command lk0 or power
off-on
0 = removal of lock lk1
3 = continuous lock lk3, removal only with command lk2
2 = removal of lock lk3
Reading parameters:
AApa
Output decimal 11-digit:
Digit 1 und 2 (10...99 or 00):
ε
(emissivity)
Digit 3 (0 ... 6): t
90
(exposure time)
Digit 4 (0 ... 8): t
CL
(max. value storage clear
mode)
Digit 5 (0 ... 1): analog output
Digit 6 und 7: (00 ... 98): temperature
Digit 8 und 9 (00 ... 97): address
Digit 10 (0 ... 6 or 8): baud rate
Digit 11 (0): always 0
Laser targeting light:
AAlaX *
)
X = 0 switch off laser
X = 1 switch on laser
Internal temperature: AAgt
Output: XXX (dec. 000 ... 098 °C or 032 ... 208 °F)
Max. internal temp.:
AAtm
Output: XXX (dec. 000 ... 098 °C or 032 ... 208 °F)
Ref. number:
AAbn
Output: XXXXXX (hex 6-digit)
Serial number:
AAsn
Output: XXXX (hex 4-digit)
Device type:
AAna
Output: „IS 12/94“, „IS 12/65“or „IGA 12/157“
(16 ASCII-characters)
