54
55
TREATMENT CARDS
For best results, you need to adhere to the prescribed care regimen. Use the
Suggested Number of Flashes
below for each treatment site, to ensure proper
treatment. Fill out the Treatment Cards below to help keep track of your treatments.
Body Hair
For a typical 1.5” x 3” treatment area,
you should use 10 flashes to fully treat
that complete area.
Treat in an organized grid pattern –
slight overlaps are OK, but do NOT treat
the same spot multiple times during
one session.
Note:
DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
Recommended Treatment Schedule:
• Use LumaRx Full-Body Hair Removal System once every other week (total of 3
treatments) on each area.
• If you have redness, blistering or other skin irritation in the treatment area, DO NOT
perform treatment. Wait until the skin returns to normal before using LumaRx
Full-Body Hair Removal System again. If the irritation does not go away within 3
days, contact Customer Service on page 51.
