28
29
2b.
Always place the skin tone sensor
window directly on the area of skin
you plan to treat. The reading will take
place automatically.
Note:
You must use the Skin Tone Sensor
to test color on each body part you plan
to treat.
2a.
Turn the POWER SWITCH on. The
SKIN TONE SENSOR will flash
YELLOW. You will hear a series of
audible “BEEPS” every 5 seconds to
remind you to take the test. For safety
reasons, after 30 seconds of inactivity,
the audible “BEEPS” will increase in
frequency until the test is taken or the
machine is turned off.
SKIN TONE SENSOR LED
will be blinking
orange
OPERATING INSTRUCTIONS
STEP 2: TURN ON AND UNLOCK
the LumaRx Full-Body Hair
Removal System.
Flip the POWER SWITCH
to turn the
power on.
Each time you turn on the LumaRx
Full-Body Hair Removal System, you will
be prompted to test your skin tone with
the SKIN TONE TESTER. The LumaRx
Full-Body Hair Removal System will play
a melody to remind you to test. See
Figure 2.
NOTE: Using the LumaRx Full-Body Hair
Removal System on darker skin tones
can result in damage to the skin (such
as burns, blisters or skin discoloration).
To help protect against such damage,
the LumaRx Full-Body Hair Removal
System requires that you test your skin
tone before every use. Since some skin
areas are darker than others, test each
different area you want to treat.
DO NOT
use the LumaRx Full-Body
Hair Removal System on tanned skin.
Even if your natural skin tone is light,
tanning makes it darker – potentially
too dark for treatment. With tanned skin,
wait until the tan has completely faded
before using the LumaRx Full-Body Hair
Removal System on that area.
Always use the Skin tone sensor to
determine if your Skin is too dark to treat
with the LumaRx Full-Body Hair Removal
System by placing the Skin Tone Sensor
on the area to be treated. Make sure
your skin in this area is clean and dry,
and shave it if necessary to be sure it is
free of hair.
This appliance has a polarized plug
(one blade is wider than the other). As
a safety feature, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature.
Figure 2
