EN
18 | LUCTRA
English
8. On/Off switch (for lights with a low power device connection, alternatively mains cable).
Scope of delivery
• User manual
• Lamp
• Mains cable with inlet connector for non-heating apparatus (LUCTRA
®
VITAWORK
®
with
connec-tion to a low power device).
• Fittings bag (in the inspection shaft in the lamp head):
– Allen key (3× for individual packaging / 10× for project packaging).
– Screws for the base plate (x3)
– Screws for the strut (x2)
– Small screw for the inspection shaft (x1)
Note:
Please contact our service team if one of the parts are missing or damaged.
Assembly
Note:
Two people and a spirit level are needed for the construction.
– Take all pieces out of the packaging.
LUCTRA
®
VITAWORK
®
– Screw the strut (6) to the base plate (7) using the hexagonal socket-head screws (9) pro-
vided.
LUCTRA
®
VITAWORK
®
CLAMP
NOTICE!
Risk of property damage!
Never fasten the lamp to a glass panel!
Make sure that the table top can bear sufficient weight!
– Fasten the lamp to the table using the clamping screw (7).
– Tighten the clamping screw (7) with the enclosed Allen key.
– Remove the adhesive tape to open the access panel (10) at the top of the lamp head (1).
– Make sure that the threaded pin (11) is completely screwed into the strut (6).
– Guide the cables through the lamp head (1).
– Fix the strut (1) to the strut (6) using the supplied hexagonal socket-head screws (12). Only
tighten the screws until they are sturdy!
Summary of Contents for VITAWORK
