8
Gently lift the back end of the LUCI SmartFrame (A) and remove the two screws that it was resting
on. Lower the LUCI SmartFrame into place (Figure 5A). The pins on the inside of the LUCI Smart-
Frame (A) should slide into the slots in the Luci Subframe (Figure 5B). Insert two M5 x 10mm flange
screws (N) in each side of the LUCI SmartFrame and tighten with a 3mm Allen wrench (Figure 5C).
Note: It may be necessary to push down slightly on the LUCI SmartFrame to seat the pins in the
slots.
STEP 5 - SECURE THE LUCI SMARTFRAME
Tools Required
- LUCI SmartFrame™ (A)
- M5 x 10mm Screws (N)
- 3mm Allen Wrench
5A
5B
5C
PINS SLIDE INTO SLOTS
Summary of Contents for SmartFrame ROVI X3
Page 1: ...INSTALLATION GUIDE ROVI X3...
Page 20: ...LUCI COM P002 054 v 2 0...
