Copyright © 2022 LUCI, All Rights Reserved.
All product names, brands, and trademarks are property of their respective owners. All company, product, and service names used
are for identification purposes only. Use of these names, trademarks, and brands does not imply endorsement.
For more information on our patents, please visit luci.com/patents
CONGRATULATIONS,
you have installed
ONCE LUCI IS INSTALLED:
Power on the wheelchair and ensure that the seat, armrests, and legrest are able to
move to their full extent without pinching or pulling any cables, or compressing any
parts of LUCI.
Ensure that leg pads and accessories, such as lateral thigh supports, do not contact or
block the front camera pods at the lowest seat elevation.
Confirm the Dashboard Reference Card is attached to the LUCI Dashboard.
Check that there are no loose, pinched or dragging cables.
Confirm the Sensor Status light on the Dashboard is orange (demo mode).
Press the LUCI button and make sure the LUCI button lights up blue, the chair can
move in each direction when clear, and the chair stops in a blocked direction of travel.
Before releasing the wheelchair to the user, the system will need to be configured. With the user in
the wheelchair, follow the instructions in the LUCI Quick Setup Guide.
®
18
Summary of Contents for SmartFrame ROVI X3
Page 1: ...INSTALLATION GUIDE ROVI X3...
Page 20: ...LUCI COM P002 054 v 2 0...
