Tools Required
- Dashboard (D)
- Dashboard Reference
Card (E)
- Color Joystick
Dashboard Bracket (G)
- Color Joystick Spacer
(H)
- 3mm Allen Wrench
- Phillips P1 Screwdriver
- 4-40 x 3/16 Phillips
Screws (P)
STEP 8B - COLOR JOYSTICK
Rotate the swing-away mount of the joystick outward to expose the mounting screws. Using a
3mm Allen wrench, remove the two mounting screws and set them aside (Figure 8B1). Remove the
joystick from the mounting bracket (Figure 8B2). Feed the joystick cable through the split in the
Color Joystick Bracket (G) (Figure 8B3). Choose the correct (left or right) Dashboard Reference
Card (E). Use four 4-40 x 3/16 inch screws
(P)
to attach the Color Joystick Dashboard Bracket
(G) to the back of the Dashboard
(D)
, with the Dashboard Reference Card (E) behind the bracket
(Figure 8B4). Route the Dashboard cable along the lower inside bend of bracket and place the
joystick module inside the Bracket. Turn the joystick module upside down, and slide the Color
Joystick Spacer (H) in between the joystick module and the bracket (Figure 8B5). Reattach the
entire joystick module to the original mounting bracket (Figure 8B6) and reattach to the wheelchair
arm. Insert and tighten the original screws.
8B3
8B5
8B1
REMOVE
8B4
8B2
8B6
REMOVE
14
Summary of Contents for SmartFrame ROVI X3
Page 1: ...INSTALLATION GUIDE ROVI X3...
Page 20: ...LUCI COM P002 054 v 2 0...
