Installing the WaveAC C ESS NET System 2-21
WaveACCESS NET Remote Unit
Antennas
This section describes the WaveACCESS NET remote
unit
antenna and cable options, as follows:
✦
Antenna Types, page 2-22.
✦
Cable Options, page 2-25.
✦
Installing the Antenna, page 2-27.
WARNING: The antenna connectors on the front panel of the
WaveACCESS NET
remote units
are non-standard. Care
should be taken that they are not damaged, since they cannot
be replaced. In addition, antennas other than those supplied
with these products will not fit properly and might cause
harmful interference.
Note: All of the WaveACCESS NET antenna options must be
professionally installed. The cable kit provided with all
external antennas must be used for all outdoor antenna
installations. This kit includes a tension release cable from
the non-standard connector on the WaveACCESS NET remote
unit to a standard N-type connector. These antennas must be
professionally installed, complying with the certified
antenna and cable kits. Please carefully review and follow
the installation instructions included with each individual
antenna kit. If you have any questions, please contact your
nearest Technical Support center.
