1-30 Quick Installation Guide
Basic Software Configuration
The WaveACCESS LINK SM1024 synchronous modems
are shipped as a master/slave pair, with a default
configuration.
It is mandatory to define the ESS-ID of the units, before
commencing use. This procedure is described below.
Certain basic parameters may be configured in order to
change the default values of the SM1024. For example,
you can change the antenna type or cable length, or
perform fine antenna adjustment, by reconfiguring the
unit. This can be achieved by using the system monitor,
or by using a Bootp server with TFTP capabilities. Refer
to the
WaveACCESS LINK User's Guide for detailed
instructions on how to perform these configurations.
To define the ESS-ID:
1.
Using the system monitor, access the
Main menu,
press 1. The Configuration menu is displayed.
2.
In the
Configuration menu, press 1. The Host ID
Configuration screen is displayed.
3.
Press 8 and type in the ESS-ID.
4.
Press S to save your work in flash memory.
5.
Repeat this procedure for each BR132, giving each
one the same ESS-ID.
This
completes the quick installation procedures for the
WaveACCESS LINK SM1024.
