Installing the WaveAC C ESS LINK System 1-21
Step 3: Powering Up the BR132
This step involves powering up the BR132.
To power up the BR132:
1.
Insert the power supply connector to the DC IN socket
located on the back panel of the BR132, shown
below, and make sure that it is securely connected.
2.
Insert the power supply plug into the mains.
WARNING: Use only the supplied power supply. Using
a different power supply may damage the WaveACCESS
LINK BR132 and invalidate the FCC certification.
Note: Always connect the power supply to the BR132
first, and only then plug it in.
3.
On the back panel of the BR132, switch the unit on.
The
PWR LED on the front of the unit lights up,
signaling that the BR132 has powered up.
