1-12 Quick Installation Guide
Installing the Antennas
The WaveACCESS LINK antennas may be placed either
indoors or outdoors.
Before you install the unit, you must choose a good
location for your antennas to ensure a line of sight to
the other WaveACCESS LINK products. You must also
ensure the shortest possible distance between the
WaveACCESS LINK unit and the antennas, in order to
minimize cable loss.
WARNING: The WaveACCESS
LINK antennas should ONLY
be installed by experienced antenna installers familiar with
local building and safety codes and, wherever necessary,
licensed by appropriate government regulatory bodies.
Failure to do so may void the Product Warranty as well as
expose the end user to legal and financial liabilities. Lucent
Technologies, its agents, resellers, or distributors, are not
liable for injury, damage or violation of government
regulations associated with the installation of the antennas.
The installer is also responsible for ensuring that the public is
not exposed to radio frequency energy levels in excess of the
FCC guidelines. These guidelines imply that no human may
conceivably be found within one foot of the front of the
antennas. If such a situation is likely to occur, the installer is
responsible for placing the appropriate caution signs to warn
the public. Lucent Technologies, its agents, resellers, or
distributors, are not liable for exposure to excessive RF
energy levels due to improper antenna installation.
The Maximum Permissible Exposure guidelines are 1 foot
(30 cm) from the WaveACCESS LINK unit, as based on the
National Council on Radiation Protection and Measurement
(NCRP). If the antennas are in an accessible area, an
appropriate warning sign must be installed in the appropriate
place.
