1-18 Quick Installation Guide
Installing the WaveACCESS LINK
BR132
This section provides the following information for
quick installation of the WaveACCESS LINK BR132,
using the default settings.
✦
Packing List, below.
✦
Installation Procedure, page 1-19.
✦
Basic Software Configuration, page 1-23.
Packing List
The WaveACCESS LINK BR132 arrives in a single
package that includes the following items:
✦
Two WaveACCESS LINK BR132 wireless bridge
units, configured as a master/slave pair.
✦
One power adapter complete with a 5' (1.5m) cord.
✦
Two optional omnidirectional dipole antennas for
indoor use (if ordered).
✦
Software diskette.
✦
This
Quick Installation Guide.
✦
CD-ROM containing documentation.
✦
Adapter cables for X.21 and V.35 connection.
You also should have received a second package that
includes the WaveACCESS LINK antenna and cable kit
you ordered with the system. This kit typically includes
the antenna, antenna cable(s), tension release cable,
female-to-female N-type adapter (if necessary), external
filter (for certain specific antennas in Europe or ETSI
compliant countries), RF cable clamps and a lightning
arrestor (if ordered).
Note: If any of these items are incomplete or missing, you
might not be able to install the WaveACCESS LINK BR132. In
such cases, contact your nearest Technical Support Center.
Refer to
Chapter 3, Technical Support
for information
.
