Lucent 5ESS DRM, User Manual

Page: 106 / 642

If the ping command fails, seek technical support .
17. Type and enter
cd /dynastar
Response:
#
18. Type and enter
pwd
Response:
/dynastar
19. Type and enter
ls -l
Response:
total XXX
-rw-r--r-- 1 root other XXXX Jul 26 10:23 cnfgload.cmp
-rw-r--r-- 1 root other XXXXX Jul 26 10:23 config
20. Type and enter:
tftp X
Where: X
=
IP address of Ethernet port at the router. (For example,
tftp
10.10.9.254
)
Response:
tftp>
21. Type and enter:
binary
Response:
tftp>
22. Type and enter:
put cnfgload.cmp
Response:
Sent XXXX bytes in XXX seconds
tftp>
23. Type and enter:
quit
Response:
#
24. On the Supervisor Console, display the Main Menu page if it is not already
displayed:
•
If the * prompt is displayed, type and enter
9999
at the * prompt to display
the DynaStar Supervisor page. Continue with the steps below indicating what
to do if the DynaStar Supervisor page is displayed.
•
If the DynaStar Supervisor page is displayed:
a. Type and enter
secret
(or the password set for your office) at the Enter
Password: prompt.
Response:
The Supervisor Console Types information appears.
NETWORK PROCEDURES
Procedure 3.5
235-200-150
October 2004
Page 3.5-4 Issue 3.00L