Lucent 5ESS DRM, User Manual

Page: 138 / 642

2. Enter
3
for router.
Response: The Router Commands menu is displayed.
3. Enter
5
for IP Port Information.
Response: The IP Port Information menu is displayed.
4. At the IP Port Information menu, enter the following information for the BRI
port: (Use the arrow keys to navigate the screen.)
•
At IP Address , enter the BRI IP Address.
For example,
10.10.8.26
•
At IP mask , enter the BRI port IP mask
•
At Protocol , enter
RIP II
. (Use the return key to change.)
5. Press the left arrow.
Response: The cursor is positioned at
process selections (Y/N)
.
6. Enter
y
.
3.10.3.5 Add the BRI as a T1 back up (T1 connection to host) to the TDM Channel
(port 8)
1. Enter
3
for configuration.
Response: The Configuration Commands menu is displayed.
2. Enter
2
for port.
Response: The Configure Port menu is displayed.
3. Enter
8
for T1 to Host.
Response: The Frame Relay Port Configuration menu is displayed.
4. Enter the following information: (Use the arrow keys to navigate the screen.)
•
At Circuit Backup , enter
Y
. (Use return key to change.)
•
At Backup when line Down , enter
150
.
•
At Restore when line Up , enter
30
.
•
At Backup Location Name , enter
BRI to Host
.
5. Press the left arrow.
Response: The cursor is positioned at
process selections (Y/N)
.
6. Enter
y
.
7. Press the esc key until the main menu is displayed.
Response: The main menu is displayed.
8. Hold down the Ctrl key and press the w key.
Response: The settings are saved to flash.
NETWORK PROCEDURES
Procedure 3.10
235-200-150
January 2003
Page 3.10-6 Issue 3.00