Lucent 5ESS DRM, User Manual, Page: 194 / 642

12. Enter the following command to set the system crash dump device to the
secondary disk.
dumpadm -d /dev/dsk/c1t1s0s1
13. Enter luxadm remove_device /dev/rdsk/c1t0s0s2 . If the following response is
received, enter “ c ” to continue. If this response is not received, seek technical
assistance.
Response:
WARNING!!! Please ensure that no filesystems are mounted on these device(s).
All data on these devices should have been backed up.
The list of devices which will be removed is:
1: Device name: /dev/rdsk/c1t0s0s2
Node WWN: [unique WWN number for the disk unit]
Device Type:Disk device
Device Paths:
/dev/rdsk/c1t0s0s2
Please verify the above list of devices and
then enter ’c’ or
〈
CR
〉
to Continue or ’q’ to Quit. [Default: c ]
14. When prompted with the following response to remove the disk, continue with
step
15
. If this response is not received,
seek technical assistance
.
Response:
stopping: /dev/rdsk/c1t0s0s2....Done
offlining: /dev/rdsk/c1t0s0s2....Done
Hit
〈
Return
〉
after removing the device(s).
15. Remove the front fascia from the workstation.
16. Locate the LED for the HDD (Hard Disk Drive) on the panel. Refer to Figure
4.5.3-1.
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.3
235-200-150
October 2005
Page 4.5.3-2 Issue 3.00B