Lucent Technologies PortMaster PM-2, Hardware Installation Manual

Page: 59 / 88

Cable and Ethernet Specifications B-1
Cable and Ethernet Specifications B
This appendix gives specifications for the following:
• Male-to-male null modem cable —connects a data terminal equipment (DTE)
device (terminal or PC) to the C0 port (See page B-2.)
• Male-to-male straight-through RS-232 cable —connects a data communications
equipment (DCE) device (modem) to the C0 port (See page B-3.)
• High-density 68-pin cable —connect modems to the high density ports on the
PortMaster 25 (See page B-4.)
• High-density 50-pin cable that splits into 50-pin connectors —connects U.S.
Robotics Quad modems to a PortMaster 25 (See page B-7.)
• RS-232 cable —connects external modems to an asynchronous ports
(See page B-10.)
• V.35 cable —connects a T1/E1 line to a W1 port (See page B-11.)
• X.21 cable —connects a T1/E1 line to a W1 port (See page B-12.)
• RS-530 cable —connect a T1/E1 line to a W1 port (See page B-13.)
• Category 5 twisted pair cable for the S/T interface —connects an ISDN BRI line to
the S/T interface (See page B-14.)
• Category 5 twisted pair cable for the U interface— connects an ISDN BRI line to
the U interface (See page B-14.)
• High-density 10-pin cable for the U interface— connects all four BRI ports on the
U interface to a punchdown block via the high density (HD) port (See page B-15.)
• Ethernet interface specifications. (See page B-16.)