System 25:
■
For Releases 1, 2, and 3, this phone must be administered as a
10-button MERLIN set (type 303).
■
■
Assigning features may be done only by the system adminis-
trator.
Use the following features with caution:
Automatic Intercom, Bridging, Coverage, Direct Station Selec-
tion, Personal Line, Pooled Facility, Send All Calls (use with
single ring reminder).
Since these features provide visual indication that the feature is
turned on, be aware that if you turn off the handset when using
that feature, you may forget that the feature is on.
Do not assign the following features: Auto Answer, Scroll,
Inspect, Directory, Next, Local, Call, and Manual Callback
Queuing.
If programming the Flex DSS or Repertory Dial feature, dial the
number to be recorded and push the button you are assigning
to the feature. You will receive 3 short beeps and a dial tone to
confirm programming.
■
■
■
■
If you are programming numbers for the Station Speed Dial
feature, dial the numbers to be stored then dial the Personal
Speed Dialing code (#20 through #39), including the #. Listen
for a confirmation tone followed by a dial tone.
System 25 buttons should be assigned as follows; 7, 8, 9, 10,
and 11 are system access or feature buttons:
9
7
8
PSTAT
ON
MSG
RANGE
BATT
10
11
29
