Lucent Technologies J85501D-1, Product Manual

Page: 3 / 84

Lucent Technologies Lineage
®
2000 ECS-6 Controller J85501D-1
2 - Table of Contents Issue 6 August 1998
Mixed Types of Rectifiers in One Plant 2 - 16
Controller Specifications 2 - 17
3 Ordering Information
Controller 3 - 1
Kits 3 - 4
Spare Parts 3 - 5
Documentation 3 - 6
4 Installation and Setup
Introduction 4 - 1
Tools Required 4 - 1
Shipped-Loose Unit Installation 4 - 1
Preparation 4 - 1
Default Factory Settings 4 - 2
Wiring Options for H569-405 4 - 4
Controller Configurations 4 - 5
Frame Mounting 4 - 6
Hardware Setup 4 - 6
Voltage Selection 4 - 7
Equalize Enable/Disable 4 - 7
Automatic Restart Enable/Disable 4 - 7
Ammeter Scale 4 - 7
Battery on Discharge Threshold 4 - 8
High Voltage Shutdown Thresholds 4 - 8
Rectifier Restart Group Isolation 4 - 8
Low Voltage Disconnect Threshold (Optional) 4 - 11
Wiring 4 - 12
Basic Controller 4 - 12
Microprocessor and Datalogger Boards 4 - 16
Circuit Pack Installation 4 - 16
5 Acceptance Testing
Test Procedures 5 - 1
Meter Calibration 5 - 2
Battery on Discharge Alarm Test 5 - 2
Float and Equalize Control Test 5 - 3
High Voltage Shutdown and Restart Test 5 - 4
Fuse Alarm Test 5 - 6
Remote On/Off (TR Signal) Test 5 - 7
Bulk Ringer Alarm Test 5 - 8
Low Voltage Battery Disconnect Test 5 - 9