Lucent Technologies Integrated Solution II System Manager'S Manual Download

Page: 97 / 177

User Maintenance

Use the arrow keys to select the item you want, and then press

[ENTER]

— The Change/Add Password window appears.

Change/Add Password

>Change/Add

HELP

CANCEL

Screen 5-6. Change/Add

Press

[ENTER]

to select

Change/Add.

If a password exists and you are changing it, you will be prompted for the old

password and then the new one as described in step 3. If no password exists,
you will be prompted only for the new one.

When you see the first message below, enter the new password and press

[ENTER]

then re-enter it at the next prompt and press

[ENTER]

again.

Old password:

New password:

Re-enter new password:

The password has been changed

Strike ENTER when ready.

—

When you have completed this, you are notified that the password has
been changed.

Press

[ENTER]

to return to the Password Protection window.

5-11

Summary of Contents for Integrated Solution II


















































































































































































Search results

Summary of Contents for Integrated Solution II

Reviews:

Related manuals for Integrated Solution II

Brands by name

Popular brands

Lucent Technologies Integrated Solution II, System Manager'S Manual

Search results

Summary of Contents for Integrated Solution II

Reviews:

Related manuals for Integrated Solution II

Brands by name

Popular brands