Lucent Technologies Integrated Solution II System Manager'S Manual Download

Page: 91 / 177

User Maintenance

Remove the diskette, label it “System Files Backup”, and press

[ENTER]

— If you do not have AUDIX Voice Power or Automated Attendant you

will be returned to the menu.

— If you have either of those applications, the following message appears:

Confirm

The Voice System Backup to diskette will save the

custom voice prompts for AUDIX Voice Power

services. Personal greetings and messages will not

be saved.

Strike ENTER when ready or ESC to stop.

If you do not want to backup your Voice System files, press

[ESC]

NOTE:

If you exit at this point, be sure to backup your voice files as soon

as possible.

—

The system responds:

Voice System Backup aborted

Strike Enter when ready.

If you want to continue this process, press

[ENTER]

. The system will calculate

the number of diskettes needed to do the Voice System backup.

— The following message appears:

Calculating the number of diskettes required.

Please wait. The backup will need approximately 1

1.44MB 3.5” diskettes. The diskette(s) will be

automatically formatted prior to the backup.

NOTE:

The number of diskettes required to do the backup may vary.

5-5

Summary of Contents for Integrated Solution II


















































































































































































Search results

Summary of Contents for Integrated Solution II

Reviews:

Related manuals for Integrated Solution II

Brands by name

Popular brands

Lucent Technologies Integrated Solution II, System Manager'S Manual

Search results

Summary of Contents for Integrated Solution II

Reviews:

Related manuals for Integrated Solution II

Brands by name

Popular brands